Fluke 110 True-RMS Digital Multimeter

Fluke 110 True-RMS Digital Multimeter

A compact True-RMS meter for accurate electrical installation and troubleshooting.

Features:

    • True-RMS AC voltage for accurate measurements on non-linear signals
    • Resistance and continuity
    • Large white LED backlight to work in poorly lit areas

    Fluke 115 Datasheet

Category: Tags: ,

The Fluke 110 True-RMS Digital Multimeter is a versatile multimeter for electrical measurements and troubleshooting.

Trusted by residential and commercial electricians for troubleshooting and maintenance the Fluke 110 is for professional use, where True-RMS accuracy is needed.

Key product capabilities

  • True-RMS ac voltage for accurate measurements on non-linear signals
  • Large white LED backlight to work in poorly lit areas
  • Resistance and continuity
  • Min/Max/Average to record signal fluctuations
  • CAT III 600 V safety rated

Specification

Fluke 110 True-RMS Digital Multimeter

Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %. The accuracy specifications take the form of: ± ( [ % of Reading ] + [ Counts ] )

General specifications
Maximum voltage (between any terminal and earth ground) 600V
Safety IEC 61010-1, Pollution degree 2
IEC 61010-2-033, CAT III 600 V
Display Digital: 6,000 counts, updates 4/sec
Bar graph 33 segments, updates 32/sec
Temperature
Operating
Storage		 -10 °C to + 50 °C
-40 °C to + 60 °C
Battery 9 volt Alkaline, IEC 6LR61
Battery life 400 hours typical, without backlight
Accuracy
Measurement Range Resolution Accuracy ± ([% of reading] + [counts])
DC millivolts 600.0 mV 0.1 mV 0.5 % + 2
DC volts 6.000 V
60.00 V
600.0 V		 0.001 V
0.01 V
0.1 V		 0.5 % + 2
Accuracy
Measurement Range Resolution Accuracy ± ([% of reading] + [counts])
AC millivolts1 true-rms 600.0 mV 0.1 mV 1.0 % + 3 (dc, 45 Hz to 500 Hz)
2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms 6.000 V
60.00 V
600.0 V		 0.001 V
0.01 V
0.1 V		 1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
Continuity 600 Ω 1 Ω Beeper on < 20 Ω, off> 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms 600.0 Ω 0.1 Ω 0.9 % + 2
6.000 kΩ
60.00 kΩ
600.0 kΩ
6.000 MΩ		 0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ		 0.9 % + 1
40.00 MΩ 0.01 MΩ 5 % + 2

1All ac voltage ranges are specified from 1 % to 100% of range. Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled.

Related Products

Quick View

Multimeters

FLUKE 113 True RMS Digital Multimeter

Quick View

Multimeters

FLUKE 114 Electrical Digital Multimeter

FLUKE 115 DMM
Quick View

Multimeters

FLUKE 115 True RMS Electricians Digital Multimeter

FLUKE 116 Multimeter
Quick View

HVAC Tools

FLUKE 116 HVAC True RMS Digital Multimeter